Solution-Synthesized Multifunctional Janus Nanotree Microswimmer

Synthetic active matters are perfect model systems for non-equilibrium thermodynamics and of great potential for novel biomedical and environmental applications. However, most applications are limited by the complicated and low-yield preparation, while a scalable synthesis for highly functional microswimmers is highly desired. In this paper, an all-solution synthesis method is developed where the gold-loaded titania-silica nanotree can be produced as a multi-functional self-propulsion microswimmer. By applying light, heat, and electric field, the Janus nanotree demonstrated multi-mode self-propulsion, including photochemical self-electrophoresis by UV and visible light radiation, thermophoresis by near-infrared light radiation, and induced-charge electrophoresis under AC electric field. Due to the scalable synthesis, the Janus nanotree is further demonstrated as a high-efficiency, low-cost, active adsorbent for water decontamination, where the toxic mercury ions can be reclaimed with enhanced efficiency.     

英寸级少层MoS2薄膜的低温可控制备

大面积二硫化钼(MoS2)薄膜的可控制备是其走向应用的关键环节,尤其是少层及P型电导的MoS2,对于器件应用具有重要意义,但鲜有文献报道.本工作采用室温射频(RF)磁控溅射法,在玻璃衬底上制备了英寸级的少层MoS2薄膜,并经低温退火,实现了大面积较高质量的MoS2薄膜可控制备.原子力显微镜(AFM)、拉曼光谱(Raman)、X射线光电子能谱(XPS)、高分辨透射电子显微镜(HRTEM)和紫外可见吸收光谱(UV-vis)分析结果表明:所制得的大面积超薄薄膜为3层的多晶膜,厚度约2.2 nm,且均匀、平整、可控,薄膜结晶性好、稳定性高.使用同样的工艺在Si/SiO2基片上制备少层MoS2薄膜,并将其制成背栅场效应晶体管(TFT),电学表征表明该薄膜呈现P型导电特征,载流子迁移率为0.183 cm2·V-1·s-1.本工作提供了一种大面积少层MoS2薄膜的可控制备方法,而且制备温度低,工艺简单且兼容性强,易实现大规模工业化生产.     

Recent advances during CH4 dry reforming for syngas production: A mini review

Given the continuing issues of environment and energy, methane dry reforming for syngas production have sparked interest among researchers, but struggled with the process immaturity owing to catalyst deactivation. This review summarizes the recent advances in the development of efficient and stable catalysts with strong resistance to coking and metal sintering, including the application of novel materials, the assessment of advanced characterizations and the compatibility to improved reaction system. One feasible option is the crystalline oxide catalysts (perovskite, pyrochlore, spinel and LDHs), which feature a fine metal dispersion and surface confinement effect via a metal exsolution strategy and exhibit superior reactivity and stability. Some new materials (h-BN, clays and MOFs) also extend the option because of their unique morphology and microstructure. It also is elaborated that progresses were achieved in advanced characterizations application, leading to success in the establishment of reaction mechanisms and attributions to the formed robust catalysts. In addition, the perspective described the upgrade of reaction system to a higher reaction efficiency and milder reaction conditions. The combination of efficient reaction systems and robust catalysts paves a way for a scaling-up application of the process.     

Effect of cooking temperature on texture and flavour binding of braised sauce porcine skin

To investigate the effect of cooking temperature (55, 65, 75, 85 and 95 °C) on texture and flavour binding of braised sauce porcine skin (BSPS), sensory acceptance, microstructure and flavour-binding capacity were investigated during the processing of BSPS. Samples cooked at 85 and 95 °C showed better texture and aroma scores. Hardness and chewiness of BSPS were obviously improved at 85 and 95 °C than control group. Collagen structure was significantly destroyed over 85 °C. The porcine skin collagen heated at 85 and 95 °C showed relatively higher flavour-binding capacity than other samples. The improvement of texture of BSPS was mainly attributed to the degradation of collagen. Higher aroma scores of BSPS were related to intense binding abilities with aroma compounds at 85 and 95 °C. Cooking at 85 or 95 °C could be an optimal cooking temperature for BSPS.     

Estimating long-term time-resolved indoor PM2.5 of outdoor and indoor origin using easily obtainable inputs

To evaluate the separate impacts on human health and establish effective control strategies, it is crucial to estimate the contribution of outdoor infiltration and indoor emission to indoor PM_2.5 in buildings. This study used an algorithm to automatically estimate the long-term time-resolved indoor PM_2.5 of outdoor and indoor origin in real apartments with natural ventilation. The inputs for the algorithm were only the time-resolved indoor/outdoor PM_2.5 concentrations and occupants’ window actions, which were easily obtained from the low-cost sensors. This study first applied the algorithm in an apartment in Tianjin, China. The indoor/outdoor contribution to the gross indoor exposure and time-resolved infiltration factor were automatically estimated using the algorithm. The influence of outdoor PM_2.5 data source and algorithm parameters on the estimated results was analyzed. The algorithm was then applied in four other apartments located in Chongqing, Shenyang, Xi'an, and Urumqi to further demonstrate its feasibility. The results provided indirect evidence, such as the plausible explanations for seasonal and spatial variation, to partially support the success of the algorithm used in real apartments. Through the analysis, this study also identified several further development directions to facilitate the practical applications of the algorithm, such as robust long-term outdoor PM_2.5 monitoring using low-cost light-scattering sensors.     

Investigation of bacterial and fungal communities in indoor and outdoor air of elementary school classrooms by 16S rRNA gene and ITS region sequencing

The advent of high-throughput sequencing methods allowed researchers to fully characterize microbial community in environmental samples, which is crucial to better understand their health effects upon exposures. In our study, we investigated bacterial and fungal community in indoor and outdoor air of nine classrooms in three elementary schools in Seoul, Korea. The extracted bacterial 16S rRNA gene and fungal ITS regions were sequenced, and their taxa were identified. Quantitative polymerase chain reaction for total bacteria DNA was also performed. The bacterial community was richer in outdoor air than classroom air, whereas fungal diversity was similar indoors and outdoors. Bacteria such as Enhydrobacter, Micrococcus, and Staphylococcus that are generally found in human skin, mucous membrane, and intestine were found in great abundance. For fungi, Cladosporium, Clitocybe, and Daedaleopsis were the most abundant genera in classroom air and mostly related to outdoor plants. Bacterial community composition in classroom air was similar among all classrooms but differed from that in outdoor air. However, indoor and outdoor fungal community compositions were similar for the same school but different among schools. Our study indicated the main source of airborne bacteria in classrooms was likely human occupants; however, classroom airborne fungi most likely originated from outdoors.     

Nymphoides peltatum as a novel feedstock for biomethane production via anaerobic co-digestion with waste sludge

Nymphoides peltatum (NP) is exploited as a novel feedstock for biomethane production via anaerobic co-digestion with waste sludge (WS). Batch experiments are conducted under mesophilic condition at NP/WS of 1/3, 2/2, 3/1, 0/4 and 4/0 based on volatile solids (VS). Prior to anaerobic digestion (AD), NP undergoes only natural drying and grinding. The maximum net cumulative methane yield (265.16 mL CH₄·g VS_added^?1) and the highest gross VS removal rate (56.12%) are obtained at NP/WS of 1/3. The kinetic analysis by the modified Gompertz model fit hinted that 28 days is adequate for methane recovery and co-digestion significantly accelerates the digestion rate. Synergetic effect is corroborated to exist in co-digestion due to amiable conditions in term of total ammonia nitrogen, free ammonia, pH, volatile fatty acids and total alkalinity. High-throughput 16S rRNA pyrosequencing reveals that Bacteroidetes, Firmicutes, Methanosarcina and Methanosaeta are conducive to AD of NP.     

某工业厂房主体结构安全性评定探讨

结构的安全性是结构防止破坏倒塌的能力,是结构工程重要的质量指标.老工业基地中的厂房主体结构安全性评价,对于厂房加固改造起到了关键性作用.文中通过对某工业厂房主体结构大量现场勘验、隐患排查及检测数据,结合结构验算,从承载能力、损伤等几方面对该老旧工业厂房的安全性进行了评价与分析,并详细介绍了检测鉴定的流程,为以后类似的老旧工业厂房的检测鉴定提供参考.     

危废填埋场地下水环境影响评价研究

危险废物具有各种危害性,不仅对人体健康有着威胁,对于环境治理来说也有着极大的消极影响。就目前来说,虽然安全填埋技术已经较为成熟,但在实际实施过程中还是容易出现渗漏事故,渗漏液在地下容易穿透防渗层,从而影响地下水,所以这也是我们需要重视的问题之一。     

基于粒子群改进FCM聚类算法优化管网压力监测点布置研究

针对供水管网运行现状,提出压力监测点优化布置方法.以构建节点压力影响系数矩阵采用粒子群优化模糊C均值聚类算法方法求解压力监测点的节点位置.粒子群算法优化避免了FCM聚类算法在初始值选取不当容易陷入局部最优的缺点,提高了压力监测点覆盖节点的精度.结果表明,压力监测点布置合理,且均匀分布于整个管网,同时提供新增压力监测点布置方法,为管网漏失识别定位奠定基础.